Cultivator with spring anchors, combined with Polaris SE heads.
• Hydraulic lifting of the grubber frame body
Hydraulic widening of the Polaris heads
Manual retraction in case of emergency of the Polaris heads
Polaris Single Effect DX and SX Headers
• For the correct operation of the machine, a D.E. distributor with a minimum oil flow of 30 liters/minute (15 liters/minute each head) is required
• BASIC MODEL: Management of the machine adjustments via tractor distributors.
MOD disp :
• 01 SE Base : Cultivator with Polaris Simple Effect heads with automatic retraction
Manual retraction in case of emergency with 3-button knob
Hydraulic extension (with quick couplings to the tractor)
Frame closure (with quick couplings to the tractor)
Requires three pairs of tractor quick couplings
• 02 SE Base : Cultivator with Polaris Simple Effect heads with automatic retraction
Manual retraction in case of emergency with 3-button knob
Hydraulic extension (with quick couplings to the tractor)
Independent hydraulic R and L tilt (with quick couplings to the tractor)
Frame closure (with quick couplings to the tractor)
Requires five pairs of tractor quick couplings
• 03 SE Base : Cultivator with Polaris Simple Effect heads with automatic retraction
Manual retraction in case of emergency with 3-button knob buttons
Hydraulic widening (with quick couplings to the tractor)
Independent R/L hydraulic lift (with quick couplings to the tractor)
Frame closure (with quick couplings to the tractor)
Five pairs of tractor quick couplings required
• 11 SE Base : Cultivator with Polaris Single Effect heads with automatic retraction
Manual retraction in case of emergency with 3-button knob
Hydraulic widening (with quick couplings to the tractor)
Frame closure (with quick couplings to the tractor)
OPERATION WITH INDEPENDENT HYDRAULIC SYSTEM
Two pairs of tractor quick couplings required
• 12 SE Base : Cultivator with Polaris Single Effect heads with automatic retraction
Manual retraction in case of emergency with 3-button knob
Hydraulic widening (with quick couplings to the tractor)
Independent R/L hydraulic tilt (with quick couplings to the tractor)
Frame closure (with quick couplings to the tractor)
WITH INDEPENDENT HYDRAULIC SYSTEM
Four pairs of tractor quick couplings are required
• 13 SE Base: Cultivator with Polaris Simple Effect heads with automatic retraction
Manual retraction in case of emergency with 3-button knob
Hydraulic widening (with quick couplings to the tractor)
Independent R and L hydraulic lift (with quick couplings to the tractor)
Frame closure (with quick couplings to the tractor)
WITH INDEPENDENT HYDRAULIC SYSTEM
Four pairs of tractor quick couplings are required
• OPTIONALS AVAILABLE:
- Blade complete with fixed comb and feeler rod L=35 cm
(For a good work result we recommend the application of the front disk or even with chisel)
- Blade complete with comb fixed and feeler rod L=40 cm
(for a good work result we recommend the application of the front disc or even with chisel)
- Blade complete with fixed comb and feeler rod L=45 cm
(For a good work result we recommend the application of the front disc or even with chisel)
- Blade complete with fixed comb and feeler rod L=63 cm
(For a good work result we recommend the application of the front disc or even with chisel)
- Blade complete with movable comb and feeler rod L=35 cm
(for a good work result we recommend the application of the front disc or even with chisel)
- Blade complete with movable comb and feeler rod L=40 cm
(for a good work result we recommend the application of the front disc or even with chisel)
- Blade complete with movable comb and feeler rod L=45 cm
(for a good work result we recommend the application of the front disk or even with a chisel)
- Blade complete with mobile comb and feeler rod L=63 cm
(for a good work result we recommend the application of the front disk or even with a chisel)
- 2D filling disc Ø 350/1**
(for a good work result we recommend the application of the support wheel kit for tools)
- 3D filling disc Ø 350/1**
(for a good work result we recommend the application of the support wheel kit for tools)
- 1D filling disc Ø 410
(for a good work result we recommend the application of the support wheel kit for tools)
- 2D filling disc Ø 410/1**
(for a good work result we recommend the application of the support wheel kit for tools)
- Rectangular plough kit (small)
- Wire cutter kit L=400 (16 holes)
* for versions 0.. minimum additional 35 litres/minute required *
(for a good work result we recommend the application of the support wheel kit for tools)
- Wire cutter kit L=600 (23 holes)
* for versions 0.. minimum additional 35 litres/minute required *
(for a good work result we recommend the application of the support wheel kit for tools)
- Wire cutter tilt kit (1000 line bracket)
- Wire pruner kit L=400 (16 holes) with flow cut-off valve
* for versions 0.. minimum additional 35 litres/minute required *
(for a good work result we recommend the application of the support wheel kit for tools)
- Wire pruner kit L=600 (23 holes) with flow cut-off valve
* for versions 0.. minimum additional 35 litres/minute required *
(for a good work result we recommend the application of the support wheel kit for tools)
- 2D star disc cutter
- 3D star disc cutter
- 4D star disc cutter
- Red star weeder Ø 540
- Red star weeder Ø 700
- Yellow star weeder Ø 540
- Yellow star weeder Ø 700
- Heat exchanger kit on 3/4 return
- Ploughshare kit for blade
- Front disc (d.320 mm)
(to be used as an alternative to the anchor with chisel)
- ORIENTABLE front disc (d.320 mm)
(to be used as an alternative to the anchor with chisel)
- Anchor with chisel (each)
(to be used as an alternative to the front disk)
- Tool support wheel kit
- 6-way hydraulic tap kit 3/8 (each)
- In-line delivery filter for oil circuit
- Bracket for dipstick adjustment
• AVAILABLE FROM THE DEALER OR THE MANUFACTURER ;
Via Bovazecchino, 674, 45021 Badia Polesine RO, Italia
and then Add to home screento install the Intractor app on your