Description

Cultivator with hydraulic widening, coil springs 30x30 with quick release brackets and cage roller
It gives the possibility of increasing or decreasing the number of springs mounted to adapt to the different widths of the vineyards (it has a quick release system of the springs to be eliminated)
Possibility of choosing between low power take-off (for crawler tractors) with cardan shaft or with pumps directly to the tractor power take-off (for wheeled and crawler vehicles). If equipped with an ascent and descent system, the pumps will necessarily be directly on the tractor's power take-off
Hydraulic predisposition for application of driving tools with PATENTED NO STOP VALVES
Triple pump multiplier kit, hoses, filters, tank and oil
Double heat exchanger with double thermostat
18-channel multifunction electronic control unit
Electro-hydraulic distributor to control 5 double-acting cylinders
55 cm right and left inter-row blades with 7+1 multifunction joystick for electro-hydraulic emergency recall of the blades individually and simultaneously
Dozer tillage spurs with side flap
4.5 -******** cm ploughshare (to be specified when ordering)
Roller hydraulic adjustment with multifunction joystick
Right and left side telescopic widening cm 50+50 with 4 cylinders controlled by multifunction joystick
Right and left hydraulic tool inclination with multifunction joystick

The machine is visible at

Via Piantonata, 18, 66022 San Martino CH, Italia