Replaceable and adjustable anti-wear skid in three positions to vary the cutting height.
Oscillating attachment system with pins mounted on slots to accommodate uneven terrain.
3 m hydraulic hoses as standard.
Standard with standard mini-loader attachment
Hydraulic piston motor in upper position. Final belt transmission, essential for applications where the transmitted power begins to become significant, has the function of an elastic joint protecting both the motor and the rotor from unexpected stresses.
Attachment with 330 mm lateral translation.
The translation is manual with a stop on 6 different positions.
Rotor can be equipped with knives for greater shredding capacity and lower power requirement. Rotor can be equipped with hammers to safely tackle branches and shrubs up to 60 mm in diameter.
Triple knife • Hammer
Front protection with steel strips. Rear roller scraper adjustable in height and reversible.
The rear idle roller can be configured in 6 distinct positions, which allow you to vary the volume and geometry of the box. There are three height positions away from the rotor (to increase the cutting volume) and three height positions near the rotor (to decrease the cutting volume), this allows you to configure the machine according to the quantity of material to be cut (and therefore the power required) and the size you want to obtain.
Related products
Via dei Carrai, 16, 06019 Umbertide PG, Italia
and then Add to home screento install the Intractor app on your