The HM with one inter-row are the ideal machines where it is necessary to make two passes inside the row. The inter-row wheel is equipped as standard with a return spring that, in the event of a collision with an obstacle, causes the inter-row to move back, but once the obstacle has been overcome, it immediately returns to its position. The possibility of mounting a hydraulic piston to adjust the cut, while maintaining the spring return, simplifies the use of the machine. The inter-row wheel is equipped with a plate under the blade and a joint on the arm that allows the wheel to move vertically (about 10 cm) to adapt in the event of a collision with the ground.
The transmission unit in the HM series machines with one inter-row is mounted on the left (with the exception of the HM265C) in order to allow a large movement of the machine itself to the right, useful in cases where a very low machine is needed that can cut the grass even under very low and long branches.
Hermes innovation is best expressed in this range with the HM301L Energy model: this machine is particularly suitable for solar systems as a lateral movement of over 2.90 m from the center of the tractor makes it the ideal and unique machine for cutting grass under solar panels. With this machine, Hermes has shown that it is always ready to meet new needs by building technologically advanced machines.
To adapt to various needs, we can equip the HM with inter-row discs of different diameters: 45 cm, 55 cm and 65 cm. In this way, it is possible to adapt the inter-row to different inter-row distances and choose the overall cutting width that best suits your needs.
Via Roma, 6, 39010 Gargazzone BZ, Italia
and then Add to home screento install the Intractor app on your