Replaceable and adjustable anti-wear slide on three positions to vary the cutting height.
3P arch made of welded carpentry, able to withstand all the stresses of a heavy series shredder, 3P attachment in cat.II and cat.III.
Front protection with steel strips. Rear support roller with height-adjustable scraper.
Hammer, triple knife.
Attachment with 465mm lateral translation. The translation is manual with stop on 6 different
positions.
The rear idle roller can be configured on 6 distinct positions, which allow you to vary the volume and geometry of the box. There are three height positions away from the rotor (to increase the cutting volume) and three height positions near the rotor (to decrease the cutting volume), this allows you to configure the machine according to the quantity of material to be cut (and therefore the power required) and the size you want to obtain
Possibility to rotate the attachment to mount the machine at the rear or front if the tractor is equipped with a lift and front PTO
Transmission made with gear box and belts, possibility of inverting the pulleys for operation at 540 rpm or 1000 rpm.
Via dei Carrai, 16, 06019 Umbertide PG, Italia
and then Add to home screento install the Intractor app on your