Description

6 versions on the 80 series… …Who more than Us?
SR 7008 is equipped with the innovative “NON-STOP” system with torque limiter which, calibrated to perfection, allows the feeding phase to be temporarily interrupted automatically in the event of overloads.

Image
Image
Image
Once the overload condition is over, without any intervention by the operator being necessary, the torque limiter transmits the motion to the feeder again.

The SR 7008 also adopts a pre-chamber system that allows for well-formed bales with uniform density even in the event of small windrows.

The 195 cm wide pick-up on the SR 7008 and 220 cm on the SR 7008 STAR, is equipped with a free wheel and two torque limiters on the augers to prevent breakages due to overloads, for the STAR version it can also be equipped with the "short hay plate with accelerator roller", to facilitate the collection of short products.

After the pick-up is the feeding system:

the rotary feeder with two comb reels conveys the product from the pick-up to the pre-chamber;
the feeding fork, synchronized with the rotary feeder and with the compression piston, feeds the pre-chamber in a continuous cycle;
mechanical sensors, when the pre-chamber is filled, trigger a kinematic mechanism so that the feeding fork performs the feeding cycle of the chamber.
To protect the machine from overloads, in addition to the torque limiters there are two safety bolts: one on the flywheel and one on the knotters. In the event of the latter breaking, a safety device also protects the needles by stopping the piston stroke.

Four Rasspee binders and two cleaning fans equip the machine.

Image
The “AUTOSTART” control unit (optional) allows you to program, via the control unit in the cabin, the pause time of the fans.

The machine is equipped with the Easy Tronic electronic control unit which, installed in the cabin, allows the regulation of the bale density and allows you to view the binding, any breakage of the strings, the unloading of the bales (both with chute and with stacker) and the partial and total bale counter.

Easy Tronic control unit
There are numerous accessories to choose from such as the humidity sensor located in the baling chamber; automatic greasing of all points that require lubrication; chain lubrication; the last bale ejector, the mounted bale stacker (which allows the grouping of two bales to halve the harvesting time in the field).

All models are equipped with an independent hydraulic system as standard. Only one simple action is needed to lift and lower the collector.

The upward opening of the front and side hoods facilitates maintenance operations and the supply of twine reels.

The machine is visible at

Via Cuneo, 8, 12037 Saluzzo CN, Italia