Spedo Giove Series Inter-row New ;
• Tool carrier for inter-row work with automatic return.
• For orchards with wide foliage, vineyards and any plantation arranged in rows.
• Giove is a versatile tool carrier for working inter-row work with automatic return. Suitable for orchards with wide foliage and any plantation arranged in rows. Extending 310 cm from the center of the tractor, it is suitable for working on rows greater than 450 cm.
• Giove is attached to the rear of the tractor via a three-point hitch, has an independent hydraulic system with approximately 60 liters of oil and given its limited weight (approximately 500 kg depending on the version) a 50 Hp tractor is sufficient for its operation.
• The hydraulic system, which is crucial for the choice of tools with which to set up Giove, is offered in two versions:
with single pump, with the possibility of setting up only with some work tools or with double pump and heat exchanger, a more performing version for setting up with any work tool.
• The adjustments are managed by the operator from the tractor's driving position via an electric joystick or in the classic version with hydraulic distributors (only for non-cab tractors).
• Working width 2.40 m;
Available models:
• GIOVE BIPOWER:
Independent hydraulic system with double pump and heat exchanger.
Automatic tool return.
JOYSTICK with 4 buttons for:
- manual retraction of the tool in case of emergency
- hydraulic adjustment of the working depth
- hydraulic extension of the tool-holder pole
- rotation of the working tool
• GIOVE 24 :
Independent hydraulic system with double pump and heat exchanger.
Automatic tool return
HYDRAULIC DISTRIBUTORS group with 3 + 1 levers for:
- manual tool return in case of emergency
- hydraulic adjustment of the working depth
- hydraulic extension of the tool holder pole
- rotation of the working tool
Only for tractors without cab
• GIOVE 14E :
Independent hydraulic system with single pump
Automatic tool return
JOYSTICK with 4 buttons for:
- manual tool return in case of emergency
- hydraulic adjustment of the working depth
- hydraulic extension of the tool holder pole
- rotation of the working tool
• GIOVE 11 E :
Independent hydraulic system with single pump
- Automatic tool return.
- Manual tool return in case of emergency with electric distributor.
- Manual working depth adjustment.
- Manual removal of the tool holder pole.
• Available or to be ordered from manufacturers or dealers;
Via Bovazecchino, 674, 45021 Badia Polesine RO, Italia
and then Add to home screento install the Intractor app on your