Description

The FACMA dryer offers a simple, economical and necessary solution for drying woody shell products (hazelnuts, walnuts, almonds, etc.). The models start from a minimum capacity of 4.5 m³ up to a maximum of 33 m³, they can be arranged in series and reach the capacity required by the user. The dryer can be loaded by means of a conveyor belt or a bucket elevator. Drying is obtained with forced ventilation of hot air, which the heat exchanger sends to the fan, which in turn pushes it inside the body of the dryer. The continuously ventilated product is mixed by a central auger and can also be ventilated with unheated air. When the degree of humidity of the product is the one required, it is extracted by gravity from the lower part of the silo-container, through the shutter and is removed with an adequate transport system. This process makes it possible to considerably reduce the drying cycle, to keep the organoleptic qualities of the product unaltered, while guaranteeing operator safety in compliance with current regulations.

MODELS AVAILABLE :
• ES 1000 : 2.3 m³ • ES 2000 : 5 m³ • ES 3000 : 7 m³ • ES 5000 : 11 m³ • ES 12000 : 25 m³ • ES 15000 : 30 m³ ;

The machine is visible at

Via Piangoli, snc, 01030 Vitorchiano VT, Italia