Back to search results

Florida NAZA.TOWER New

Ask for info

Machine manufacturers

FLORIDA di MANTOVANI GIUSEPPE & ANTONIO Srl

Belfiore (VR) - IT

Follow

Contact the advertiser

Machine manufacturers

FLORIDA di MANTOVANI GIUSEPPE & ANTONIO Srl

Belfiore (VR) - IT

Follow

Contact the advertiser

Description

Florida NAZA TOWER mounted sprayer

STANDARD EQUIPMENT:
- Polyethylene tank
- Fan group with tower diffuser and front suction
- Hot-dip galvanized frame and diffuser
- Aluminum impeller with variable pitch blades and clutch
- Two-speed gearbox and disengagement
- Aluminum manual control with pressure regulator placed on the frame
- Complete connections with R1 hydraulic type hoses
- External suction filter with check valve
- Inspectable hydraulic agitator
- Double brass jets with non-drip and ceramic plates
- Cast holder rods in stainless steel
- Hand washing tank
- External level tube with graduated scale
- Side valve for tank emptying
- Circuit washing device


AVAILABLE PUMPS:
COMET ALUMINUM: APS 51, APS 71, APS 96, APS 121.
COMET BRASS: IDS 960, IDS 1201, IDS 1401.
ANNOVI REVERBERI ALUMINUM: AR 503, AR 813, AR 1064, AR 1203, BHA 130
ANNOVI REVERBERI BRASS: BHS 130

TECHNICAL FEATURES:
All FLORIDA sprayers comply with CE regulations concerning safety and health protection;
they also comply with other European standards on safety and environmental protection.

Tank
- Effective capacity greater than 5% of the nominal capacity;
- Quantity of residual liquid in a flat position and with an inclination of 10% lower than the limits established by current regulations;
- Tank for washing the hydraulic circuit;
- Tank for clean hand washing water.

Pumps
Characteristics of the pumps available:
- Diaphragm type with flow rate of 40/120 litres/minute and maximum pressure of 40/50 bar.
- Piston type with flow rate of 70/90 litres/minute and maximum pressure of 50/60 bar.

Jets
Double body brass jets with 0.5 bar diaphragm check valve.
Available with ceramic plates, Albuz nozzles, Spraying Systems nozzles.
For normal, medium and low volume treatments.

Fan assembly
With variable pitch aluminum propeller, two speed gearbox, centrifugal clutch, turret

Multiple models available;

For more information, visit the attached technical sheet;

Available or to order from retailers

The machine is visible at

Viale del Lavoro, 14, 37050 Belfiore VR, Italia